Planet Internet Telephony PBX System IPX-300 Series User Manual Download

Page: 58 / 96

WAN

Enable/Disable

The WAN IP port packet filter function, control a network IP port,

default setting is

Enable

Enable

Enable/Disable the Internet to WAN IP source port rules, default

setting is

Disable

Source IP

This is the filter WAN IP address.

Example: 209.131.36.158

Dest. Port

This is the port used for source IP service.

Protocol

This Protocol Used for the source IP service. Select either TCP or

UDP.

Block

Wan IP Port Block time setting. Select

Always

By Schedule.

Day

Block Day setting, select a All / Mon-Sat./ Mon-Fri./Mon./ Tues./

Wed./Thu./Fri./Sat./Sun.

Time

Block Time setting, select time range is 00:00 to 23:59.

Table 4-13. Packet filter-WAN description

LAN

Enable/Disable

Internet to LAN filter function, default setting is

Enable

. A

prohibitive rule set should only allow the necessary

Internet/DMZ services to LAN (Local Area Network) clients.

Enable

Enable/Disable the WAN IP source port rules, default setting

Disable

Source IP

This is the filter source IP address to LAN.

Dest. Port

This is the port used for source IP.

Protocol

This Protocol Used for the WAN Filter service. Select either

TCP or UDP.

Day

Block Day setting, select All / Mon-Sat./ Mon-Fri./Mon./

Tues./ Wed./Thu./Fri./Sat./Sun.

Time

Block Time setting, select time range is 00:00 to 23:59

Table 4-14. Packet filter-LAN description

MAC

Enable/Disable

Form internet MAC filter function, default setting is

Enable.

Block

Wan IP Port Block time Setting. Select Always or

Schedule

Summary of Contents for Internet Telephony PBX System IPX-300 Series

































































































Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands

Planet Internet Telephony PBX System IPX-300 Series, User Manual

Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands