2. FAN Cable Connection
There are two FAN ports on the front panel. One is on the FAN card; the other
is beside the HK port. To make the fans work, you must use an RJ45-to-RJ45
connector cable to connect the two FAN ports.
FAN Port RJ-45 pin assignment:
1 2 3 4 5 6 7 8
3 , 4
5
6
7
8
GND
FAN
ERR1
FAN
ERR2
FAN
ERR3
FAN
Status
3. ADSL and POTS Connections
The IDL-4802 supports 48 ports ADSL subscribers per box. There are four RJ-21
50-pin female connectors on the front panel of the system. Two for ADSL lines and
two for POTS interfaces.
To connect the subscriber lines, use cables with the RJ-21 50-pin male connectors.
When installing, just plug the end of cable with connector into the LINE and PHONE
connectors on the front panel. The other end of the cable is generally tied to the
MDF (Main Distribution Frame).
Note
The MDF Patch panel is optional of standard package
.
