32
33
5.4 View
The ICF-1000P supports PIP (Picture in Picture) for you to view remote site and local site
on same screen. You can use this function to switch the video showing mode. There are
three modes available for selection.
Press [Window] key to switch the video display mode in the sequence as below:
Remote and local video
g
Remote full screen video
g
Local full screen video.
5.5 Picture Quality
This function is to display the status of Network connecting, for example, connecting time,
TX/RX Bit Rate as well as TX/RX Frame Rate and so on. For getting better quality you can
adjust the settings below under online mode.
Press [Menu] key to show the connecting status and to adjust the camera and display
picture parameters and speaker volume.
TX: Transmitting Rate. RX: Receiving Rate
Encode: Encoding Rate Decode: Decoding Rate
5.6 Adjust on-line video and audio quality
For getting better video and audio quality you can adjust the settings below under online
mode.
•
Speaker Volume
•
Camera Hue
•
Camera Saturation
•
Camera Contrast
•
Camera Brightness
•
Display Hue
•
Display Saturation
•
Display Contrast
•
Display Brightness