background image

Trademarks

Copyright © PLANET Technology Corp. 2003.

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.  All other trade-

marks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in 

all  environments  and  applications,  and  makes  no  warranty  and  representa-

tion,  either  implied  or  expressed,  with  respect  to  the  quality,  performance, 

merchantability, or fitness for a particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; 

PLANET  disclaims  liability  for  any  inaccuracies  or  omissions  that  may  have 

occurred.

Information in this User’s Manual is subject to change without notice and does 

not represent a commitment on the part of PLANET. PLANET assumes no re-

sponsibility for any inaccuracies that may be contained in this User’s Manual. 

PLANET makes no commitment to update or keep current the information in 

this User’s Manual, and reserves the right to make improvements to this User’s 

Manual and/or to the products described in this User’s Manual, at any time 

without notice. If you find information in this manual that is incorrect, mislead-

ing, or incomplete, we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the regulations for 

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 

are  designed  to  provide  reasonable  protection  against  harmful  interference 

when the equipment is operated in a commercial environment. This equipment 

generates, uses, and can radiate radio frequency energy and, if not installed 

and used in accordance with this user’s guide, may cause harmful interference 

to radio communications. Operation of this equipment in a residential area is 

likely to cause harmful interference, in which case the user will be required to 

correct the interference at his own expense.

CE Mark Warning

In  a  domestic  environment,  this  product  may  cause  radio  interference,  in 

which case the user may be required to take adequate measures.

Revision 

User’s manual for PLANET Internet Conferencing Phone

Model: ICF-1000P

Rev: 1.0 (August. 2003)

Part No. EM-ICF1KP

Summary of Contents for ICF-1000P
















































Reviews: