8
3. Reset Button
This button is used to restore the all factory default settings. Sometimes restarting
the device will make the system back to a normal state. However, if the system
still got problems after restart, user can restore the factory default settings and
install it again.
Restore the device:
a. Press the button down continuously.
b. Hold the button at least 5 seconds and release it. Then the device has been
restored to default settings and reboot again.
4. Power Jack
The input power is DC 12V.
Note
1. Only use the power adapter supplied with internet camera
Otherwise, the product may be damaged.
2. The power adapter is unnecessary when internet camera is
connected to a PoE switch. Otherwise, the product may be
damaged when internet camera is connected to a PoE switch
and power adapter simultaneously.
5. MIC in (audio in)
Connect a microphone to the IP camera.
6. Line out (audio out)
Connect a loud speaker to the IP camera. This is for voice alerting and two-way
audio.
2.2.3 ICA-H312 Installation
1. Fix IP camera to desired location with stand.
2. Plug-in Ethernet Cable into RJ45 connector (LAN port).
3. Connect the attached power adapter to IP camera and plug-in this adapter into
power outlet.
4. Connect Video BNC connector to a TV set if necessary (to check camera viewing
angle and focus).
5. Done.
