17
Restore the device:
a. Press the button down continuously.
b. Hold the button at least 5 seconds and release it. Then the device has been
restored to default settings and reboot again.
4. Power Jack
The input power is DC 12V.
Note
1. ONLY use package power adapter supplied with the internet.
Otherwise, the product may be damaged.
2. The power adapter is unnecessary when internet camera is
connected to a PoE switch. Otherwise, the product may be
damaged when internet camera is connected to a PoE switch
and power adapter simultaneously.
5. MIC in (audio in)
Connect a microphone to the IP camera.
6. Line out (audio out)
Connect a loud speaker to the IP camera. This is for voice alerting and two-way
audio.
2.5.3 ICA-HM135 Installation
1. Use provided L-wrench loosen the tamper-resistant housing cover (with screws
still attached on the cover). The unit has a factory installed side conduit entry
and one may adjust the cables to back conduit entry according to installation
requirement.
