Planet ICA-151 User Manual Download Page 46

Page: 46 / 48

ICA-151 User Guide

Appendix A --- Streaming Video / Audio Solution

Streaming video is a sequence of "moving images" that are sent in compressed form over

the Internet and displayed by the viewer as they arrive. With streaming, a Web user does

not have to wait to download a large file before seeing the video or hearing the sound.

Instead, the media is sent in a continuous stream and is played as it arrives.

• To snapshot a JPEG image from the camera with specified resolution and quality:

http://<ip>/img/snapshot.cgi?[size=<value>][&quality=<value>]

Size = 1 (160*120)

2 (320*240)

3 (640*480)

Quality = 5 (Very low)

4 (Low)

3 (Normal)

2 (High)

1 (Very high)

• To stream M-JPEG video from the camera (M-JPEG mode only)

http://<ip>/img/mjpeg.htm

• To stream video through the RTP/RTSP protocol from camera (MPEG-4 mode only)

rtsp://<ip>/img/media.sav

Note:

Users need to specify the desired protocol in the players.

• To snapshot a JPEG image (160*120, very low quality) through a 3G mobile phone:

http://<ip>/img/mobile.cgi

Summary of Contents for ICA-151

















































Search results

Summary of Contents for ICA-151

Reviews:

Related manuals for ICA-151

Brands by name

Popular brands

Planet ICA-151, User Manual

Search results

Summary of Contents for ICA-151

Reviews:

Related manuals for ICA-151

Brands by name

Popular brands