manualshive.com logo in svg

Planet ICA-150, User Manual

Share
Download
Planet ICA-150 User Manual Download Page 58

 

Motion Detection Screen 

This screen is displayed when the 

Motion Detection

 option on the 

Administration

 menu is 

clicked. 

. 

 

Figure 45: Motion Detection Screen 

Data – Motion Detection Screen 

Motion Detection 

Motion Detection 

Alerts can be sent when motion is detected. Select the desired 
option:  

•

 

Disable - Motion detection alerts are disabled.  

•

 

Enable - Motion detection alerts are enabled during the 

scheduled periods.  

Note: If Motion Detection Alerts are enabled, you must enable and 
configure either the E-mail or SMTP Server sections in order to 
have an alert sent. 

Pan/Tilt 
Configuration 

This option is only available if your camera is fitted with a Pan/Tilt 
control. If available, select the desired option to resolve conflict 
between the Pan/Tilt and Motion Detection features. 

Set Detection Areas 
Button 

Click this button to enter the motion detection screen. You can set 
the area or areas of the video image to be examined, and adjust the 
threshold of detection for each area.  

Note:   Motion detection can be triggered by rapid changes in 
lighting condition, as well as by moving objects. For this reason, it 
should only be used indoors. 

52 

Summary of Contents for ICA-150
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands