2.3 Physical Installation
1. Connect an Ethernet cable
Connect one end of an Ethernet cable to the LAN port located on the IP
Camera bottom panel and attach the other end to the network device
(hub or switch).
2. Attach the external power supply
Connect the provided power adapter to the IP Camera’s connector
labeled “12V DC” on the bottom panel.
Note
1. Please use the power adapter that is bundled in
the package. Using a power supply with a different
voltage rating will damage and void the warranty for
this product.
2. For ICA-107P, either powered from AC adapter, or
from PoE is allowed.
3. Check the LEDs
The power LED should be on.
2.4 IP Camera Admin Software
Follow the steps below to install the initial utility. The following
installation is implemented in Windows XP and the installation
procedure is similar to Windows 2000.
1. Insert the bundle CD disk into your CD-ROM drive. A welcome web
page should open with your default browser. If not, please double
click on the “default.htm” in the CD.
2. Please click the IP Camera model name.
3. Click on the hyperlink “IP Camera initial utility”.
