7
Power and Electric-lock Connector
1
2
3
4
5
6
7
+DC 12V
VSS
NC
COM
NO
S-IN
S-OUT
12V DC Input
Electric-lock switch
Indoor switch
JP1 Jumper
There are two modes for power supply of electric-lock as shown in the
picture below. (The default is “Active Mode”).
Passive Mode:
When the electric-lock starting current is more than
12V/1000mA, the external drive mode, the electric lock
interface for short circuit output control, is used.
Active Mode:
When the electric-lock starting current is less than
12V/1000mA, the electric lock interface is 12V DC output
in the internal drive mode is used.
Wiring instructions
NO:
Normally Open Contact
COM:
Common Contact
NC:
Normally Close Contact