manualshive.com logo in svg

Planet FSD-1020, Manual

Share
Download
Planet FSD-1020 Manual Download Page 42

Operation  3-23

   

 

FSD-1020 User's Manual 

 

Disable 

Enter and hold 

 

Back 

Enter 

Table 3.8 Loop Isolation. 

Flow Control 

Flow Control is another important feature supported by Desktop Switch 
FSD-1020. This feature provides a back-pressure method of preventing any 
packet loss

,

 controlling the buffer-memory usage on every port effectively. It 

is disabled at the time of shipment from the manufacturer. You have to enable 
the function through the Mini-Console. The command sequence is:  

UNIT CONFIG > FLOW CONTROL > ENABLE><Enter and hold> 

 

 Long Frame  

The system can check the length of each packet sent. Packets larger than the 
range 1024~1518 bytes are long frames. When set to Enabled, Long Frames 
will be counted. When set to Disabled, Long Frames will be not be counted. 

Lock the Console 

Setting this option to 

Enable

 locks the system settings. If there is no password 

set, a prompt will request one be entered. 
 

UNIT CONFIG > CONSOLE LOCK> ENABLE><Enter and hold> 

 

If User Password has been set and the Lock Function “Enabled”, the unit 
does not allow any settings to be changed, such as port setting and unit 
configuration, unless the correct password is keyed in and the 

Summary of Contents for FSD-1020























































Reviews:

No comments

Brands by name

Popular brands

Load more brands