FGSW-2620VM User’s Manual
Address Table
8K entries
Share data Buffer
512K Bytes
Maximum Frame Size
1522 Bytes
Flow Control
Back pressure for Half-Duplex, IEEE 802.3x Pause Frame for
Full-Duplex
Dimensions
440 x 120 x 44 mm, 1U height
Weight
1.87kg
Power Requirement
100~240V AC, 50-60 Hz
Power Consumption /
Dissipation
13.5 Watts maximum / 46 BTU/hr maximum
Temperature
Operating: 0~50 degree C, Storage -40~70 degree C
Humidity Operating:
10% to 90%, Storage: 5% to 95% (Non-condensing)
Layer 2 Function
Management Interface
Web Browser
SNMP Monitor, SNMP Trap
Port Configuration
Per port disable/enable,
Auto-negotiation disable/enable
Flow control disable/enable
Bandwidth control on each port
Port Status
Display per port’s disable/enable status
Per port’s link status and speed duplex mode
Flow control status
Trunk Configuration
Support 13 groups of 8-Port trunk support
VLAN Configuration
IEEE 802.1Q Tag-Based VLAN and Port-based VLAN ; supports
maximum up to 26 VLAN groups
Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree
Port Monitoring
One Mirroring port to monitor one mirrored port. The monitor modes are
RX, TX and RX & TX
IGMP Snooping
Supports v1 and v2 protocol
Supports IGMP Querier
QoS Configuration
IEEE 802.1p QoS on each port; 4 priority queues per port
Port counters
Display detail traffic counters on each port
Rate Limit
Inbound Rate Limit and Outbound Traffic shaping; allow per 1Mbits
setting
Access Control List
Supports up to 16 Access Control list group
Standards Conformance
Safety
UL, cUL, CE/EN60950
Standards Compliance
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.1Q
IEEE 802.1p
IEEE 802.1X
IEEE 802.1w
Ethernet
Fast Ethernet
Gigabit Ethernet
Gigabit Ethernet
Full-duplex flow control
Tag-Based VLAN
Class of service
Port-Based Authentication
Rapid Spanning Tree protocol
8
