FGSW-2620VM User’s Manual
Activity page.
Work Ports
Allow max four ports can be aggregated at the same time. If LACP static trunk group, the
exceed ports are standby and able to aggregate if work ports fail. If it is local static trunk
group, the number must be as same as the group member ports.
Choose Port
Select the ports to join the trunk group. Allow max four ports can be aggregated at the
same time.
Add button
Press the button to add the port.
Remove button
Press the button to remove unwanted ports.
Apply button
Press the button to save the configuerations.
Delete button
Press the button to delete Trunk Group and the Group ID.
4.2.5.2 Aggregator Information
When you had setup the LACP aggregator, you will see relation information in here.
Figure 4-2-7
Trunking - Aggregator Information interface
OObject
Description
Group Key
Indicates the Static Trunking Groupd ID.
Port Member
Indicates the selected ports that joined the Trunk group.
4.2.5.3 Aggregator State Activity
When you had setup the LACP aggregator, you can configure port state activity. You can mark or un-mark the port.
30
