background image

FGSW-2620VM User’s Manual 

4.3.1.2 802.1Q Ingress Filter 

This section provides 802.1Q Ingress Filter of each port from the Switch, the screen in 

Figure 4-3-5

 appears. 

 

Figure 4-3-5 

802.1Q Ingress filter interface 

OObject 

Description 

Ingress Filter 

Ingress filtering lets frames belonging to a specific VLAN to be forwarded if the port 

belongs to that VLAN.   

Enable:

 Forward only packets with VID matching this port's configured VID.   

Disable:

 Disable Ingress filter function. 

Acceptable Frame type 

ALL: 

Acceptable all Packet. 

Tag Only:

 Only packet with match VLAN ID can be permission to go through the 

port. 

PVID 

Set the port VLAN ID that will be assigned to untagged traffic on a given port. This 

feature is useful for accommodating devices that you want to participate in the 

VLAN but that don't support tagging. The switch each port allows user to set one 

VLAN ID, the range is 1~255, default VLAN ID is 1. The VLAN ID must as same as 

the VLAN ID that the port belong to VLAN group, or the untagged traffic will be 

dropped. 

Save button 

Press the button to save configurations. 

 

40 

Summary of Contents for FGSW-2620VM Series










































































Reviews: