- 52 -
4.10 Web Smart Function
This function could provide you to define device indicate connect to each port on Web Smart Switch, the screen in
Figure
4-63
appears.
Figure 4-63
Web Smart Funciton Web Page screen
The available options are shown as below:
1. PC
2. PC+Voip
3. Switch
4. Router
5. AP
6. Server
7. Printer
8. Guest
9. Other
The screen in
Figure 4-64
appears and the setup procedure shown as below:
1. Choose a device from options of Select a port function, the screen in
Figure 4-65
appears.
2. Check the port that need to marked, the screen in
Figure 4-66
appears.
3. After setup completed, press
“Save”
to save current configuration, the screen in
Figure 4-67
appears.
4. Please
press
“Back”
for return to Web Smart Function screen, the screen in
Figure 4-68
appears.
Summary of Contents for FGSW-2402VS
