Planet BM-525 User Manual Download

Page: 85 / 205

BM-525 Bandwidth Management Gateway User’s Manual

- 80 -

Define the required fields of Authentication

Authentication Management

Provide the Administrator the port number and valid time to setup BM-525 authentication.

(Have to setup the Authentication first)

Authentication Port:

The internal user has to pass the authentication to access to the

Internet when enable BM-525.

Re-Login if Idle:

When the internal user access to Internet, can setup the idle time after

passing authentication. If idle time exceeds the time you setup, the authentication will be

invalid. The default value is 30 minutes.

URL to redirect when authentication succeeds:

The user who had passes

Authentication has to connect to the specific web site. (It will connect to the web site

directly which the user want to login) The default value is blank.

Messages to display when user login:

It will display the login message in the

authentication Web UI. (Support HTML) The default value is blank (display no message

in authentication Web UI)

Add the following setting in this function:

Authentication Setting Web UI

Summary of Contents for BM-525














































































































































































































Search results

Summary of Contents for BM-525

Reviews:

Related manuals for BM-525

Brands by name

Popular brands

Planet BM-525, User Manual

Search results

Summary of Contents for BM-525

Reviews:

Related manuals for BM-525

Brands by name

Popular brands