Planet BM-2101 User Manual Download

Page: 187 / 278

LAN To DMZ

：

The source IP is in LAN and the destination IP is in DMZ . The

MIS engineer can set the LAN To DMZ policy included the network packets

and services .

DMZ To LAN

：

The source IP is in DMZ and the destination IP is in LAN . The

MIS engineer can set the DMZ To LAN policy included the network packets

and services .

DMZ To WAN

：

The source IP is in DMZ and the destination IP is in WAN . The

MIS engineer can set the DMZ To WAN policy included the network packets

and services .

All the packets need to be permitted by the policy in BM-2101 . The MIS engineer has to set the

fitness policy in BM-2101, in order to make the LAN , WAN and DMZ connection works.

The BM-2101 ‘s VPN function use the trunk technology by policy management , in order to

monitor the packets through the data exchange.

１８６

Summary of Contents for BM-2101























































































































































































































































































Search results

Summary of Contents for BM-2101

Reviews:

Related manuals for BM-2101

Brands by name

Popular brands

Planet BM-2101, User Manual

Search results

Summary of Contents for BM-2101

Reviews:

Related manuals for BM-2101

Brands by name

Popular brands