BM-2010A / BM-2100 Bandwidth Manager User
’
s Manual
- 26 -
- Delete the IP/MAC binding
Press
“
New
”
or modify button, the IP/MAC Table configuration page will be shown as the following.
♦
MAC Address:
The MAC address of the host in format of xx:xx:xx:xx:xx:xx.
♦
IP Address:
The IP address of the host in format of xxx.xxx.xxx.xxx. If you want to specify the MAC
address only, input 0.0.0.0 here.
♦
Enable:
Enable or Disable the IP/MAC binding. Only enabled IP/MAC binding is applied to the allow or
block blocking mode.
4.2.5 Discover IP/MAC
The Discover IP/MAC function help you to find all the IP/MAC binding on your local network. The following
functions and information are provided on this page:
♦
IP Subnet:
Input a class C subnet for the Bandwidth Manager to find all host and their MAC address on
the subnet.
♦
Ignore Defined
: Select Yes if you want to ignore the defined IP/MAC binding. However, if only MAC
address or IP address is defined on the IP/MAC table, the bandwidth manager will still show the IP/MAC
binding on the result window.
♦
Start Discover
: Click this button to start the discovery process.
After clicking the
“
Start Discover
”
, a warning message is shown to prompt for waiting a moment and don
’
t
press stop button of browser. A screen similar to the following is then shown for all IP/MAC address the
bandwidth manager found on the IP subnet you specify. The following functions and information are
provided on this page:
