BM-2010A / BM-2100 Bandwidth Manager User
’
s Manual
- 10 -
Chapter 3
：
Getting Started
This chapter explains how to setup your computer to be a client to manage the Bandwidth Manager.
3.1 Initial Setup by LCD Panel
1. Press (ENTER) button to enter Select menu.
2. Choose Setup Network and press (ENTER) button to enter IP setup process.
3. Set the Bandwidth Manager IP address:
Please press (
▲
) or (
▼
) button to edit the Bandwidth Manager IP address. Press (ENTER)
button to edit next number. After editing all the number, press (ENTER) button to start the
Network mask configuration.
NOTE:
You can press (
▲
) or (
▼
) longer for it the number to change in unit of 10.
4. Set the Bandwidth Manager subnet mask:
Please press ((
▲
) or (
▼
) button to edit the Bandwidth Manager IP address. Press (ENTER)
button to edit next number. After editing all the number, press (ENTER) button to start the
Gateway address configuration.
5. Set the Bandwidth Manager Gateway address:
Please press (
▲
) or (
▼
) button to edit the Bandwidth Manager IP address. Press (ENTER)
button to edit next number. After editing all the number, press (ENTER) button to save the
configuration.
6. Confirm and Save Configuration:
If the configuration is Ok, please press (ENTER) button to save. Otherwise, press (ESC) button to
go back to SELECT Menu.
7. After you press (ENTER), the following message is shown:
。
Now the new IP settings is active and you can start on web management of the Bandwidth
Manager.
Save Config?
Y(Enter)
N(ESC)
SELECT:
Setup Network
IP Address:
192.168.1.251
Netmask
Address:
255.255.255.0
Gateway
Address:
192.168.1.254
Setup Network
Save OK....
