Setup
Options
Mode
Select the desired mode:
•
802.11G-plus (TI)
This allows clients to use any of the
following modes:
•
Standard 802.11b
•
802.11B+ (Texas Instruments proprietary enhanced mode)
•
Standard 802.11g
•
802.11G-plus (Texas Instruments proprietary enhanced
mode). This mode can increase throughput by up to 50%,
but will only work between compatible TI wireless stations.
•
802.11g & 802.11b
- Both 802.11.g and 802.11b Wireless
stations will be able to use the ADW-4300.
•
802.11g only
- Only 802.11g Wireless stations can use the
ADW-4300.
•
802.11b only
- Only 802.11b connections are available.
802.11g Wireless Stations will only be able to use the ADW-
4300 if they are fully backward-compatible with the 802.11b
standard.
Channel No.
Select the Channel you wish to use on your Wireless LAN.
•
If you experience interference (shown by lost connections
and/or slow data transfers) you may need to experiment with
different channels to see which is the best.
•
If using multiple Access Points, adjacent Access Points
should use different Channels to reduce interference.
Broadcast
SSID
If enabled, the ADW-4300 will broadcast its SSID. This allows
PCs and other wireless stations to detect this Access Point and
use the correct SSID.
If disabled, PC users will have to manually enter the SSID and
other details of the wireless interface before they can connect to
this Access Point.
Wireless Security
Current Setting
The current Wireless security is displayed. The default value is
Disabled.
Configure
Button
Click this button to access the Wireless security sub-screen, and
view or change the settings. See the following section for details.
Access Point
Enable Wire-
less
Access Point
Enable this if you want to use Wireless Access Point function.
If disabled, no Wireless stations can use the Access Point
function, and all connections must be made via the wired LAN.
19
