The following table describes the parameters of this page:
Field
Description
DHCP Mode
If set to
DHCP Server
, the router can assign IP addresses, IP
default gateway and DNS Servers to the host in Windows95,
Windows NT and other operation systems that support the
DHCP client.
IP Pool Range
It specifies the first and the la st IP address in the IP address
pool. The router assigns IP address that is in the IP pool range
to the host.
Show Client
Click it, th e
Active D HCP Client T able
appears. It shows IP
addresses assigned to clients.
Default Gateway
Enter the default gateway of the IP address pool.
Max Lease Time
The lease time determines the period that the host ret ains the
assigned IP addresses before the IP addresses change.
Domain Name
Enter the domain name if you know. If you leave this blank, the
domain name obt ained by DHCP from the ISP is used. Y ou
must enter host name (system name) on each individual PC.
The domain name can be assigned from the router through the
DHCP server.
DNS Server
Enter the DNS Server if you know, the default is router’s IP.
Click
Show C lient
in the
DHCP Mode
page, the p age shown in the following figure
appears. You can view the IP address assigned to each DHCP client.
The following table describes the parameters and buttons in this page:
Field
Description
IP Address
It displays the IP address assigned to the DHCP client from the
router.
MAC Address
It displays the MAC address of the DHCP client.
Each Ether net device has a uni que MAC address. The MAC
address is assigned at the factory and it consists of six pairs of
hexadecimal character, for example, 00-A0-C5-00-02-12.
Expired (s)
It displays the lease time. The lease time determines the period
that the host ret ains the assigned IP addresses before the IP
addresses change.
Refresh
Click it to refresh this page.
Close
Click it to close this page.
Click Set V endorClass IP Range in the DHCP Mode p age, the p age s hown in the
following figure appears. You can view the IP address assigned to each DHCP client. The
following table describes the parameters and buttons in this page:
28
