If you want to modify the configuration, click
BACK
to return to the pr evious page. If you
ensure the configuration is correct, click
FINISH
to take the configuration effect.
1483 MER
In the
Setup WAN Interface
page, enter the correct PVC, set the channel mode to
1483
MER
.
The following table describes the parameters of this page:
Field
Description
PVC Settings
VPI
: V irtual Path Identifier (VPI) is the virtual p
ath between two
points in an ATM network, ranging from 0 to 255.
VCI
: Virtual Channel Identifier (VCI) is the virtual channel between
two points in an ATM network, ranging from 32 to 65535 (0 to 31 is
reserved for local management of ATM traffic).
Encapsulation Select the method of encap sulation provided by your ISP . Y ou can
select
LLC/SNAP
or
VC-Mux
.
Channel
Mode
Select the W AN connection type. Y ou can select
1483 Bridged
,
1483
MER
,
PPP over Ethernet (PPPoE)
,
PPP over ATM (PPPoA)
, or
1483
Routed
. In this example,
1483 MER
is selected.
20
