Field
Description
IP Address
Enter the IP address of LAN interface. It is
recommended to use an address from a block that
is reserved for private us e. This address block is
192.168.1.1- 192.168.255.254.
Subnet Mask
Enter the subnet mask of LAN interface. The
range of subnet mask is from
255.255.0.0-255.255.255.254.
Secondary IP
Select it to enable the secondary LAN IP address.
The two LAN IP addresses must be in the different
network.
Link Speed/Duplex Mode Select the Link S peed/Duplex Mode whic h you
need.
ETHERNET Status Table This table will show the current link mode.
MAC Address Control
If you want to use the MAC address control
feature, select it and add the MAC address.
New MAC Address
Add the MAC address which you want can access
the router via the LAN port.
Current Allo wed MAC
Address Table
This t able will sho w the current allo wed MAC
address .
3.4.1.2 DHCP
Dynamic Host Configuration Protocol (D HCP) allows the individual PC to obt ain the
TCP/IP configuration from the centralized DHCP server. You can configure this router as a
DHCP server or disable it. The DHCP server can assign IP address, IP default gateway,
and DNS s erver to DHCP clients. This router can also act as a surrogate DHCP server
(DHCP proxy) where it relays IP address assignment from an actual real DHCP server to
clients. You can enable or disable DHCP server or DHCP proxy.
Click
DHCP
in the left pane, the page shown in the following figure appears.
27
