manualshive.com logo in svg

Planet Networking & Communication WGSD-10020, User Manual, Page: 65 / 557

Share
Download
Planet Networking & Communication WGSD-10020 User Manual Download Page 65

User’s Manual of WGSD-10020 Series 

 

4.2.12 Detailed Log 

The switch system detailed log information is provided here. The Detailed Log screen in 

Figure 4-2-15

 appears. 

 

Figure 4-2-15

 Detailed Log page screenshot 

 

The page includes the following fields: 

Object 

Description 

 

ID 

The ID (>= 1) of the system log entry. 

 

Message 

The message of the system log entry. 

 

Buttons 

: Click to refresh the page; any changes made locally will be undone. 

: Updates the system log entries, starting from the first available entry ID. 

: Updates the system log entries, ending at the last entry currently displayed. 

: Updates the system log entries, starting from the last entry currently displayed. 

: Updates the system log entries, ending at the last available entry ID. 

 

 

 

 

 

 

 

 

 

 

65 

 

Summary of Contents for WGSD-10020














































































































































































































































































































































































































































































































































































Reviews:

No comments