Planet Networking & Communication WGSD-10020 User Manual Download

Page: 199 / 557

User’s Manual of WGSD-10020 Series

Object

Description



Mode

Indicates the Voice VLAN mode operation. We must disable MSTP feature

before we enable Voice VLAN. It can avoid the conflict of ingress filter. Possible

modes are:

Enabled

: Enable Voice VLAN mode operation.

Disabled

: Disable Voice VLAN mode operation.



VLAN ID

Indicates the Voice VLAN ID. It should be a unique VLAN ID in the system and

cannot equal each port PVID. It is conflict configuration if the value equal

management VID, MVR VID, PVID etc. The allowed range is 1 to 4095.



Age Time

Indicates the Voice VLAN secure learning age time. The allowed range is 10 to

10000000 seconds. It used when security mode or auto detect mode is enabled.

In other cases, it will based hardware age time. The actual age time will be

situated in the [age_time; 2 * age_time] interval.



Traffic Class

Indicates the Voice VLAN traffic class. All traffic on Voice VLAN will apply this

class.



Port Mode

Indicates the Voice VLAN port mode. When the port mode isn't disabled, we must

disable MSTP feature before we enable Voice VLAN. It can avoid the conflict of

ingress filter. Possible port modes are:

Disabled

: Disjoin from Voice VLAN.

Auto

: Enable auto detect mode. It detects whether there is VoIP phone attached

on the specific port and configure the Voice VLAN members automatically.

Forced

: Forced join to Voice VLAN.



Port Security

Indicates the Voice VLAN port security mode. When the function is enabled, all

non-telephone MAC address in Voice VLAN will be blocked 10 seconds. Possible

port modes are:

Enabled

: Enable Voice VLAN security mode operation.

Disabled

: Disable Voice VLAN security mode operation.



Port Discovery

Protocol

Indicates the Voice VLAN port discovery protocol. It will only work when auto

detect mode is enabled. We should enable LLDP feature before configuring

discovery protocol to "LLDP" or "Both". Changing the discovery protocol to "OUI"

or "LLDP" will restart auto detect process. Possible discovery protocols are:

OUI

: Detect telephony device by OUI address.

LLDP

: Detect telephony device by LLDP.

Both

: Both OUI and LLDP.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

199

Summary of Contents for WGSD-10020














































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WGSD-10020

Reviews:

Related manuals for WGSD-10020

Brands by name

Popular brands

Planet Networking & Communication WGSD-10020, User Manual

Search results

Summary of Contents for WGSD-10020

Reviews:

Related manuals for WGSD-10020

Brands by name

Popular brands