Planet Networking & Communication WGSD-10020 User Manual Download Page 273

Page: 273 / 557

User’s Manual of WGSD-10020 Series

4.12.11 IP Source Guard Static Table

This page provides Static IP Source Guard Table. The Static IP Source Guard Table screen in

Figure 4-12-11

appears.

Figure 4-12-11

Static IP Source Guard Table screen page screenshot

The page includes the following fields:

Object

Description



Delete

Check to delete the entry. It will be deleted during the next save.



Port

The logical port for the settings.



VLAN ID

The VLAN ID for the settings.



IP Address

Allowed Source IP address.



MAC Address

Allowed Source MAC address.

Buttons

: Click to add a new entry.

: Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

4.12.12 ARP Inspection

ARP Inspection is a secure feature. Several types of attacks can be launched against a host or devices connected to Layer 2

networks by "poisoning" the ARP caches. This feature is used to block such attacks. Only valid ARP requests and responses

can go through DUT. This page provides ARP Inspection related configuration. The ARP Inspection Configuration screen in

Figure 4-12-12

appears.

273

Summary of Contents for WGSD-10020














































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WGSD-10020

Reviews:

Planet Networking & Communication WGSD-10020, User Manual, Page: 273 / 557

Search results

Summary of Contents for WGSD-10020

Reviews: