User Manual of WDAP-C7200E
-33-
AP1 enters the MAC address of AP2. And AP2 enters the MAC address of AP1. Then select the same Channel
to establish the connection.
Figure 5-15
Super WDS Mode – AP1
Figure 5-16
Super WDS Mode – AP2
The page includes the following fields:
Object
Description
SSID
It is the wireless network name. The default SSID is “
PLANET_5G
”.
Bandwidth
Select the operating channel width, “
20MHz
” or “
40MHz
”.
Channel
Select the operating channel you would like to use. The channel range will be changed by
selecting a different domain.
MAC
Enter the MAC address of slave AP.
Encryption
Select the wireless encryption. The default is “
Open
”.
Summary of Contents for WDAP-C7200E
Page 1: ......
Page 44: ...User Manual of WDAP C7200E 37 5 6 2 2 4G 5 8G Wireless 5 6 2 1 2 4G 5 8G Basic Settings ...
Page 48: ...User Manual of WDAP C7200E 41 5 6 2 4 Advanced Settings Figure 5 25 Advanced Settings ...
Page 76: ...User Manual of WDAP C7200E 69 Q2 How to Set Up the WDS Connection Topology ...