3.5.5.1 LAN Setting
To configure the LAN interface, click on the
LAN Setting
link in the left navigation
bar, show as below.
The
D
ynamic
H
ost
C
onfiguration
P
rotocol (DHCP) Server gives out IP addresses
when a device is booting up and request an IP to be logged on to the network. It must be
set as a DHCP client to obtain the IP address automatically.
Note
: By factory default, the DHCP is disabled, VC-200M’s default LAN IP address
is 192.168.1.100, and VC-200S is 192.168.1.200.
The screen contains the following details:
Filed Description
IP Address
Enter the LAN interface IP Address of
VC-200M/VC-200S
Subnet Mask
Enter the LAN Subnet Mask of VC-200M/VC-200S
The Gateway acts as
DHCP Server
Enable or disables the DHCP Server of the of
VC-200M/VC-200S.
Select the check-box to enable this option.
IP Pool Starting
Address
Enter the starting IP Address of the DHCP server.(When
Enable DHCP Server)
37
Summary of Contents for VC-200M
Page 1: ...VDSL2 Router VC 200M VC 200S User s Manual ...
Page 56: ...56 RJ 45 port ...
