High Definition HDMI Extender over IP with PoE
IHD-210PT / IHD-210PR
14
1.5.2 Interfaces:
Transmitter (IHD-210PT)
Receiver (IHD-210PR)
Interfaces Definition:
Position
Description
Function
1
DC 5V
5V/2A DC power input.
Only use one power source, either from DC or from 802.3af/at PoE+
Ethernet switch.
2
Ethernet (PoE)
Connect to a LAN Switch.
IGMP snooping and jumbo frame supported Gigabit IEEE 802.3af/at
PoE+ Ethernet switch is recommended.
LED.
1. LAN LED (
green
color):
This LED will be flashing while network is accessing via Ethernet.
2. Power LED (
orange
color):
When the device is powered on, and the device is connected to
Ethernet switch, the LED will be always on.
3
HDMI Out
HDMI Type A female connector for video output.
4
HDMI In
HDMI Type A female connector for connecting to the HDMI source (built in
transmitter,
5
IR
Transmitter: 3.5mm jack for IR emitter cable to control video source device.
Receiver: 3.5mm jack for IR receiver cable to receive signal from remote
controller.
6
RS232
DB-9 female connector for RS232 bi-directional remote extension.
7
Channel
Display group indication.
8
Group
Group configuration, 6-bit switch for 64 stream channel selection.
9
Reset
Power on the device and press the reset button for over one second to
restore it to factory default settings.
