High Definition HDMI Extender over IP with PoE
IHD-210PT / IHD-210PR
31
4.1.4 Rx Setup Page
On the “Rx Setup page”, please select the Rx device first by the “Rx Device Selection” and then the
relevant setting information of the selected Rx device will be shown in the “Rx Device Info” area.
Description
Function
Device IP
Show the selected device’s IP address.
Rx Version
Show the firmware version.
Tx Device IP
If the Rx connects to Tx successfully, it will show the Tx’s IP address.
LAN Status
If the device connects to LAN successfully, it will show “Link Up”.
Video Lock
1. Lock: The video is transmitting.
2. Unlock: There is no transmitting video.
HDCP
If the transmitting video supports HDCP, it will show “on”.
If the transmitting video does not support HDCP, it will show “off”.
IP Setup
Setting the IP address of the selected device --
By default, the IP address is 169.254.xxx.xxx. After changing the setting, please click
the update button and then click the reboot button to
make the change effective.
Screen Mode
Screen On: The device displays the video.
Screen Off: The device does not display the video.
OSD
1. Info Display Auto Mode: The selected RX will always show OSD for a while, and
