User’s Manual of ICS-2x00T Serial Device Server Series
62
Do nothing
: it will pack the accumulated data including Separators.
Strip Separator
: it controls striping of Separator from the received characters
before the received characters are sent to the network.
•
Separator Time Out
Separator timeout controls the maximum amount of time that can be used to buffer
characters before the characters are sent to the network. A smaller values will increase
the number of network packets, but reduce the amount of time to receive characters, on
the contrary, Larger values reduce the number of network packets, but increase the
amount of time to receive characters. The range of value is from 0 to 65535. The default
is
0 ms.
Example: Connect to Modbus sensor via Virtual COM mode
Figure 4-5-28:
Virtual COM Mode Application
ICS-2400T
1. Set Port Configuration as shown below.
Figure 4-5-29:
Port Configuration
2. Set operation mode as
VCOM mode.
Figure 4-5-30:
VCOM Mode Configuration