![background image](http://html.mh-extra.com/html/planet-networking-and-communication/ics-100/ics-100_user-manual_1563882043.webp)
User’s Manual of ICS-10x
-39-
Setup Operation Mode and Serial Port of ICS-10x
1. Set the ICS-10X mode to
“Telnet server mode
” from web interface.
2. Set the Serial Port Configuration of ICS-10x as below:
Mode:
RS-232
Baudrare:
9600
Character Bits:
8
Parity Type :
none
Stop Bit :
1
Hardware Flow Control:
none
Execute “Telnet” command from Windows Start Menu
3. Click
the
Start Menu
and go to
Run
4. Type
"
telnet
" without the quotes, and hit enter.
Figure 4-40
Example Windows Excuse - Telnet
5. While the Telnet window appears, type “
open xxx,xxx,xxx,xxx
”, xxx is the IP address of the ICS-10x Telnet Server.
In this case we type “
open 192.168.0.100
” and press enter.
Figure 4-41
Example Windows Excuse - Telnet
6. Then can use the telnet connection to configure the switch just like console direct connect to the COM port of the
switch.