![background image](http://html.mh-extra.com/html/planet-networking-and-communication/ics-100/ics-100_user-manual_1563882027.webp)
User’s Manual of ICS-10x
-23-
When DHCP Client is set to Enable, the IP Address, Subnet Mask, Gateway and DNS fields are not
allow to be changed.
If the Media Converter is set to DHCP Client enable, you can use
PLANET Smart Discovery
or
PLANET VCOM Utility
to search the Media Converter which with DHCP assigned IP address.
4.4 Operation Mode
The ICS-10x make connected Serial equipment becomes IP-based. That also makes them be able to connect to a TCP/IP
networking immediately. The ICS-10x allow traditional Computer/Client COM ports access to a serial equipment
anywhere on the Ethernet LAN network.
This
Operation Mode
configure page allows setup Serial interface operation mode
as below:
TCP Server
TCP Client
UDP Client
Virtual COM
Telnet Server
Pair connection (local)
Pair connection (Master)
Figure 4-11
Operation Mode Configuration screen
Select the operation mode for the application and press the
“Apply”
button to take affect.
4.4.1 TCP server mode
When the ICS-10x be configured to
TCP Server
mode, it allows Serial device that connected to serial port of ICS-10x to
establish TCP communication over Intranet or Internet network between:
Remote Host (Computer) with Serial applications using TCP/IP network socket programs