HTTP Port
80
Enter the HTTP port number. The HTTP port allowed
range is 80 or 8010 to 8060. For access the WSG-403
system under NAT, please tab the “http://HTTP Port IP
Address: Port Number”.
HTTPS Port
443
Enter the HTTPS port number. The HTTPS port allowed
range is 443 or 4430 to 4440. For access the WSG-403
system, please tab the “https://HTTPS Port IP Address:
Port Number”.
Administrator Idle-Timeout 5 Minutes
The idle time out valid range is 1-1440. If the idle time out
is set as 5 minutes, it means if the administrator doesn’t
send packet in 5 minutes, the administrator will logout
automatically.
DHCP Server
Enable
There are three types of DHCP Services.
DHCP Disable—Disable the DHCP server function.
DHCP Relay—Enable DHCP Relay function.
DHCP Server—Enable DHCP server function.
DHCP Relay
To route DHCP through an external server, the administrator needs to
enable the DHCP relay and assign a valid DHCP server IP address.
DHCP Server IP Address
Empty
Enter the IP address of DHCP server.
DHCP Server
The WSG-403's DHCP server is turned on and running by default
when you install it in your network.
DHCP Pool Starting
Address
10.59.1.2
Enter the DHCP Pool Starting IP address.
Pool Size
253
The DHCP pool size range is 1 to 512.
Lease Time
300
Minutes
The DHCP lease time. The DHCP lease time range is 1 to
71582788
minutes.
Primary DNS Server
168.95.1.1 Enter the IP address of the network’s primary DNS server.
Secondary DNS Server
Empty
Enter the IP address of a second DNS server on the
network.
Email Server Redirect
To prevent some subscriber’s original Email server may protect by
firewall or NAT network. WSG-403 provides an extra Email server
parameter to forward the subscriber’s Email. The WSG-403 not only
forwards the subscribers’ E-mail via other E-mail server but also
changes the SMTP header. The recipient of your E-mail sees the
message as if you sent it from your local Internet Service Provide, not
form the hotel or other place. Note: Before setting this sever, please
make sure the e-mail sever relay function is opened. It must not
exceed 50 characters.
IP Address or Domain
Name
Empty
Enter the E-mail server IP address or domain name.
Wireless Subscriber Gateway
41
Summary of Contents for Hot Spot WSG-403
