•
1
-, 2-, 4-, or 8- analog ports for communication over an
existing IP network or the Internet
• Ethernet connectivity and full IP compatibility with
existing routers and WAN infrastructure
• Overhead voice paging to multiple locations within a
facility, nearby or branch office buildings, or to remote
locations
• Single- or multi-zone paging at any or all locations when
used with Bogen’s Multi-Zone telephone paging
interface (UTI3
1
2)
• Efficiently communicate company-wide emergency
alerts or general announcements
• FXS/FXO connectors on each port for direct connec-
tion to Bogen’s telephone paging interfaces
• Configuration and management using a Web
browser or Microsoft Windows
®
• Utilizes the H.323 or SIP protocols to provide
complete interoperability with other Internet telephony
solutions
• Multi-port models provide contact closure Receive &
Transmit in E&M mode
• Connects directly to telephone or PBX
• Single Port Protocol (SPP) allows the use of
dynamic IP addresses
• Voice compression to 5.3K bps per call with
support for multiple algorithms, including ITU G.723
and G.729
• Minimum requirements: Ethernet network, WAN
connection, IP addresses
• Supports H.450 supplementary services to provide for
call transfer, call forwarding, call hold, call waiting and
name identification
• T.38 real-time fax relay for interoperability among other
VOIP equipment
• PSTN fail-over automatically routes calls over the
PSTN network if the IP network is down
• Two-year warranty
Features
Description
Specifications subject to change without notice.
© 2005 Bogen Communications, Inc.
Part No. 54-8023-25A Printed in U.S.A. 0507
VOIP Gateways for
Paging
Models MVP130BG, MVP210BG,
MVP410BG, & MVP810BG
Bogen’s voice over IP gateways (Models MVP
1
30BG, MVP2
1
0BG, MVP4
1
0BG, and MVP8
1
0BG) allow
paging communications to be sent over the Internet or Intranet. FXS pass through expands the paging
capabilities of Bogen’s PCM zone paging system by providing a continuous connection between buildings using
a Local- or Wide-Area Network.
Bogen’s VOIP gateways are available in models ranging from
1
to 8 ports. Each gateway connects directly to
Bogen paging systems and equipment to provide overhead paging to all locations within a facility or across a
campus without running new lines. The
1
-port model supports FXS and FXO. Multi-port models support FXS,
FXO, and provide contact closure Receive & Transmit in E&M mode.
The VOIP gateways are easily managed locally using a Windows
®
-based software application or remotely with a
web browser or SNMP.
Bogen’s VOIP gateways can also be used for toll-free voice or fax communications when connected to phones,
fax machines, key systems, PSTN lines, or a PBX to provide real-time, toll-quality voice connections to any office
on your VOIP network.
MVP130BG
MVP210BG
MVP410BG
MVP810BG
