Subnet Mask
Enter the subnet mask for the IP address.
Gateway IP Gateway
Enter the Gateway IP address for the xDSL/Cable connection (provided by
your ISP).
Primary DNS Server
A primary DNS server IP address for the xDSL/Cable connection (provided
by your ISP).
Secondary DNS Server
A secondary DNS server IP address for the xDSL/Cable connection
(provided by your ISP). If the primary DNS Server IP were not available,
meanwhile, Secondary DNS Server IP would start in the same time.
PPPoE
Figure 3-40 PPPoE Setting Screen
Item
Default
Description
User Name
Empty
Enter your PPPoE account name. The user name can consist
of up to 80 alphanumeric characters and is case sensitive.
Password
Empty
Enter your PPPoE password. The password can consist of up
to 80 alphanumeric characters and is case sensitive.
PPP
MTU
Setting 1492
MTU (Maximum Transfer Unit) specifies maximum
transmission unit size.
TCP MSS Setting
1452
MSS (Maximum Segment Size) specifies maximum segment
size.
Item
Default
Description
Service Name
Empty
Enter the service name provided by your ISP. The service
name can consist of up to 64 alphanumeric characters and is
case sensitive.
Connect on Demand and Max Idle Time
Connect on Demand Enable
Max Idle Time
10 Minutes
You can configure your WSG-403 to cut your connection with
your ISP after a specified period of time (Max Idle Time). If
you have been disconnected due to inactivity, Connect on
Demand enables your WSG-403 to automatically re-establish
your connection as soon as you attempt to access the
Internet again. If you wish to activate Connect on Demand,
WSG-403 User Guide
38
Summary of Contents for Hot Spot WSG-403
