manualshive.com logo in svg

Planet Networking & Communication FGSW-1816HPS, User Manual, Page: 50 / 105

Share
Download
Planet Networking & Communication FGSW-1816HPS User Manual Download Page 50

User’s Manual of FGSW-1816HPS 

 

 

50 

 

Buttons 

: Click to apply changes   

: Click to change VLAN mode. 

 

 

4.4.3 VLAN Port Configuration   

This page introduces detailed information of VLAN Member function of switch. It has two of VLAN Member types, one is for 

Port-based VLAN mode and one is for Tag-based VLAN mode. Both 

Figures 4-4-5 and 4-4-6 

show the type of VLAN Member.   

 

4.4.3.1

 

Port-based VLAN Mode 

The VLAN Port Configuration screen in 

Figure 4-4-5

 appears. 

 

Figure 4-4-5:

 Port-based VLAN Port Configuration Page Screenshot 

 

The page includes the following fields: 

Object 

Description 

 

Port 

Select port number for this drop-down list to enable the function.

 

 

Destination Port   

Enable / Disable the selected port to join its VLAN member 

 

Buttons 

: Click to apply changes   

: Click to restore default settings 

: Click to read the information. 

 

Summary of Contents for FGSW-1816HPS










































































































Reviews:

No comments