Planet Networking & Communication FGSW-1816HPS User Manual Download Page 30

Page: 30 / 105

User’s Manual of FGSW-1816HPS

4.2 System

Use the System menu items to display and configure basic administrative details of the PoE Web Smart Switch. Under the

System, the following topics are provided to configure and view the system information: This section has the following items:

■

System Information

The switch system information is provided here.

■

IP Configurations

Configure the switch-managed■

Password Setting

Configure new user name and password on this page.

■

Factory Default

Restore the default configuration on the switch.

■

Firmware Update

Upgrade the firmware on this page.

■

Reboot

Restart the switch.

■

NTP Setting

Configure NTP on this page.

4.2.1 System Information

The System Info page provides information for the current device information. System Info page helps a switch administrator to

identify the hardware MAC address, software version and system uptime. The screens in

Figure 4-2-1

appear.

Figure 4-2-1

System Information Page Screenshot

The page includes the following fields:

Object

Description



Comment

Describes the PoE Web Smart Switch. Up to 15 characters is allowed for the

Device Description.



System Description

Display the current Switch title.



MAC Address

The MAC Address of this PoE Web Smart Switch.

Summary of Contents for FGSW-1816HPS










































































































Search results

Summary of Contents for FGSW-1816HPS

Reviews:

Planet Networking & Communication FGSW-1816HPS, User Manual, Page: 30 / 105

Search results

Summary of Contents for FGSW-1816HPS

Reviews: