![background image](http://html.mh-extra.com/html/planet-networking-and-communication/bsp-360/bsp-360_quick-installation-manual_1563952016.webp)
15
4. Install the terminal block on the BSP-360.
Note
The voltage of DC out is based on the battery voltage and the
maximum DC out from the BSP-360 is
24VDC, 1A
.
The wire gauge for the terminal block should be in the range
from
14 to 24 AWG
.
The external device should also be grounded properly.
Please ensure the output voltage is correct for remote device.
Otherwise, it will damage your remote device.
Step 6.
Connect to PC
RJ45/UTP Cable
IP Address:
192.168.0.100
IP Address:
192.168.0.x
After completing the above 6 steps, the BSP-360 is ready for service.