![background image](http://html.mh-extra.com/html/planet-networking-and-communication/bsp-360/bsp-360_quick-installation-manual_1563952013.webp)
12
Step 3.
Install PV Panel
Solar PV
DC
DC
Bat.
PV
Alarm
+
+
1 2 3 4 5 6
PV In
1. Connect the negative electrode of the PV panel to the terminal for the negative
electrode of the PV panel on the BSP-360.
2. Connect the positive electrode of the PV panel to the terminal for the positive
electrode of the PV panel on the BSP-360.
3. After the PV is well connected to the BSP-360 and providing 24V or above
voltage, the
System LED will blink fast
for battery charge if the battery is not
full. And Fault LED will turn off.
Note
Be noted for the thickness of electric wire and please refer to the
section --
Recommended Use of the Connected Wires
in the
Quick Installation Guide.
Check the total power consumption of your device and the
sunshine duration of your area from the weather bureau for a
proper PV. Improper PV could shorten the battery life or provide
insufficient power to the BSP-360.
The BSP-360 supports a maximum of
45V DC input
.
Note
Please link PLANET download center and download
BSP-
360-PV&BAT_calculation
. The calculation list can help you to
select solar panel and battery.