FIG-1
FIG-2
FIG-3
FIG-4
To switch from magazine fed to hopper fed simply follow these basic
steps.
FIG-1
Locate the PAL feedtube plug screw
A
.
FIG-2
Rotate the PAL feedtube plug screw
A
counter-clockwise to remove
using a 5/32 hex key.
FIG-3
Using the 5/32 hex key, bend the arms of the feedtube plug apart
B
and
release the plug from the body.
FIG-4
Once released, simply pull the feedtube plug away from the body
B
.
1
IMPORTANT!
The PAL feedtube plug will be held firmly in place so
a reasonable amount of force may be required to remove.
WARNING!
The PAL feedneck feedtube plug will be secure when installed so will require an
amount of force and agitation to remove it.
ALWAYS ensure that the MG 100 is degased and free from projectiles before
beginning these procedures.
WARNING
A
A
B
B
5/32
1
12
MG 100
QUICK START
CHANGING BETWEEN
MAGFED AND HOPPER FED
Summary of Contents for MG 100
