FIG-1
1
- +
1/8
A
B
24
MG 100
QUICK START
VELOCITY ADJUSTMENT
FIG-1
Insert a 1/8 hex key
A
into the velocity adjuster screw
B
to alter the
velocity of the MG 100.
Adjusting the velocity:
1
Turn the hex key clockwise to reduce velocity.
2
Turn the hex key counter-clockwise to increase velocity.
3
Fire two clearing shots after each velocity adjustment for an
accurate velocity reading.
1
DO NOT
turn the adjuster screw in too far. This will prevent the
MG 100 from firing.
2
DO NOT
exceed 300 FPS when using .68 calibre paintballs.
3
DO NOT
exceed 300 FPS when using shaped rounds.
WARNING!
ALWAYS conform with the velocity limits of the venue and/or local laws.
ALWAYS wear correct protective equipment when firing your marker.
NEVER point your marker in the direction of other people when not on the field.
ALWAYS be aware of where the barrel is facing when adjusting the velocity.
WARNING
Summary of Contents for MG 100
