Other Operation
Rear view function
In any running state, the video signal can switch to reverse video state when reversing
the car, and the system shall return to its initial running state after reversing the car.
Do not rely on CCD system completely, please make sure you use direct eyesight while
driving. Back rearview system only assists in driving. As the distance range of rearview
system is limited, completely relying on the rearview system during driving may cause
accidents.
Reverse field simulation
Rearview backup image
Warning
1. Click on the [ ] icon in the main interface into the SWC. settings interface.
2. The original vehicle to the control line positive,
negative with the machine control line in the
positive and negative connection.
3. Click the SWC buttons will appear
corresponding operating tips, and fundamental
operation prompts the SWC feature set.
4. Set function to save the settings and click the
Confirm icon to confirm.
Note: To modify function settings, repeat procedures 3~4.
To reset functions, click Reset icon, all the settings set before shall be cleared, repeat
procedures 3~4 for resetting.
External input operation
Connect the video input plug with external video input jack, and connect the audio input
plug with external audio input jack.
Touch [AUX-IN] icon on main interface to access external AUX-IN interface.
ST. Wheel setting
Audio
→
You can adjust the volume, bass, pitch for input audio. You can adjust the
speaker volume by adjusting the front and back, left and right column.
Video
→
You can adjust the brightness, contrast, saturation and hue for input video.
You can also choose the video standard mode.
Calendar
Touch the icon [ ] in main interface to enter
thefollowing
Calendar
interface:
Calculator
Touch the icon [ ]in main interface to enter
calculator interface to operate
＋/－/×/÷
