PLANEPRINT BIG BOBBER, Printing & Construction Manual

Page: 45 / 52

BIG BOBBER
45
PRINTING & CONSTRUCTION MANUAL
© PLANEPRINT
EN
With the STL data you will fi nd the PDF fi le Canopy-path.pdf as a cutting template for the wind shield.
IMPORTANT: the print must be set to 100% page size, so that the size fi ts exactly!
Suitable foils are overhead foils or binding covers of scripts (~0,2mm, offi ce trade) in DIN A4 format.
Before cutting, apply
transparent double-sided
adhesive tape here.
Cut the foil as exactly as possible
along the black lines.
Cutout for the tow coupling
(only if you put one in).
This l
ine must be exact
ly 100 mm long on t
he printout.
Installation of the wing shield