PLANEPRINT BIG BOBBER, Printing & Construction Manual

Page: 20 / 52

BIG BOBBER
20
PRINTING & CONSTRUCTION MANUAL
© PLANEPRINT
EN
INFO
STL:
Elevator 1-left_profi le3_bb.stl
Elevator 1-right_profi le3_bb.stl
Material: PLA
Weight: ~ 23 g
ADDITIONAL SETTINGS
• Brim
Finally, at the tip, the Nozzle
temperature should be reduced
and the fan to 100%!
INFO
STL:
Elevator 2_profi le3_bb.stl
Material: PLA
Weight: ~ 26 g
ADDITIONAL SETTINGS
Non necessary
PLEASE NOTE
In profi le P3_SURFACE, there
should not be more than one STL
on the buildplate at the same time,
otherwise slicing errors can occur!
PROFILE P3_SURFACE
The following parts must be sliced with the profi le
PROFILE P3_SURFACE (1 Wall Print). Recommended
additional settings are listed in the screenshots.