background image

Installation

Planar makes no warranty with respect to any installation of Planar 
product(s) by Planar, any authorized dealer, or any other person.

Technical 
assistance

In North America, call 1 (866) PLANAR1 between 8 

A

.

M

. and 5 

P

.

M

. Pacific 

time, Monday through Friday, or send a description of your technical 
issues and e-mail address to

 [email protected]

.

In Europe, call +358 9 420 01 between 8 

A

.

M

. and 4 

P

.

M

. Finnish 

time (Eastern European time), Monday through Friday, or send 
a description of your technical issues and e-mail address to 

[email protected]

.

Repair service

In North America, call Planar at (503) 748-1100 between 8 

A

.

M

. and 

P

.

M

. Pacific time, Monday through Friday, or fax your request to 

(503) 748-1493. You need the unit’s serial number and a brief 
description of the problem to receive an RMA number.

In Europe, call Planar Customer Service at +358 9 420 01 between 8 

A

.

M

and 4 

P

.

M

. Eastern European time, Monday through Friday, or fax your 

request to +358 9 420 0200. You need the unit’s serial number and 
a brief description of the problem to receive an RMA number.

To protect Planar employees from potential health hazards, Planar 
requires that the RMA product be disinfected before returning to Planar 
for service. Any product not cleaned prior to shipment will be returned 
to the customer.

Returns are not accepted without an assigned RMA number.

In-transit damage is not covered by the warranty. Insure your shipment. 
Planar only pays for the return shipment by surface transportation. 
It is responsibility of the sender to prepay transportation charges.

Summary of Contents for VitalScreen S VSS15X





































Reviews: