Planar UltraLux Remote Monitoring
56
Planar UltraLux Series Installation Guide
4
When you click
Reset ALL to Factory Default
, you receive the Confirm Factory
Reset page. Click
OK, Reset to Factory Defaults and Reboot
if you are sure you
want to reset ALL settings to the factory default.
5
The top of each page shows the Planar logo, which is a link to
http://www.planar.com
. You can change this link to refer to any URL that you find
useful by typing it into the
Product ID Link
box.
6
To make this link live, click
Change Product ID Link
.
7
In normal operations, Remote Monitoring polls the displays at a rate of one per
second to look for user requests that have been made using the IR remote control
and the on-screen menus. In some situations, this polling can have a noticeable
performance impact. If you want to disable this polling, select the
Disable
polling for alert conditions
checkbox. When you are finished, click
Change
Advanced Settings
.
Reboot
Click
Reboot now
to reboot your system. This copies everything in flash memory to
RAM. RAM memory is used for all current operations. When power is applied to
Remote monitoring, flash memory is copied to RAM. Reboot takes about 90 seconds.
