Turning the Display Off
PS7050/PS7050T and PS8250/PS8250T User Guide
19
Turning the Display Off
With the power on, press the power button on the remote or keypad to put the LCD
panel in a standby mode. To turn off power completely, disconnect the AC power
cord from the power outlet.
Note:
If there is no signal for a 10 minutes on a HDMI, DisplayPort, or Component signal or 1
minute on a VGA signal and the Auto Sleep OSD setting is set to On, the LCD panel will
automatically go into standby mode.
Selecting the Input Source
Input sources must be selected manually. Below are the ways you can select the
input source:
1
Press the Input button on the remote control to activate the input onscreen
menu. Use the arrow buttons to select the desired input source and press OK.
2
Using the remote control, select PC RGB, HDMI, or Video source to select your
source. If desired source is not selected, press multiple times to toggle through
the input options.
Summary of Contents for PS7050
