Planar PS7050, User Manual

Page: 11 / 42

VESA Mounts, General Description
PS7050/PS7050T and PS8250/PS8250T User Guide 11
Cooling Requirements
For optimal performance, active cooling by the installer should be planned for when
the ambient temperature anywhere in the wall is predicted to be above the specified
ambient temperature for the display.
VESA Mounts, General Description
VESA mounts are used to secure the PS7050/PS7050T and the PS8250/PS8250T for
display. The displays can be installed using a variety of VESA mounts available
through Planar. If you do not have a VESA mount and would like to purchase one,
contact Planar.
If you purchased a VESA mount, you should have a received a separate box with
mounting supplies and an Installation manual. Follow these instructions carefully.
Keep in mind the following general installation guidelines:
• Screw length is crucial and will vary depending on the type of mount you use.
Total screw length will include the penetration length plus the length required
by the type of VESA mount in use.
Caution:
Shorter screws will result in insufficient mounting strength and longer screws
could puncture parts inside the display. Prior to installation, make sure you know where all of
the mounting points are located. Follow all safety precautions outlined in the VESA Mount
Installation manual.
Cleaning the Display
If dust has collected on the power plug, removed the plug from the outlet and clean
off the dust. Dust build-up may cause a fire.
Remove the power plug before cleaning. Failure to do so may result in electrical
shock or damage.
Keep the following points in mind when cleaning the surface of the display:
• When the surface of the display becomes dirty, wipe the surface lightly with a
soft clean cloth.
• If the surface requires additional cleaning, use LCD screen cleaner or LCD wipes,
which are available at most electronics stores.
• Do not let cleaner seep into the display, as it may cause electrical shock or
damage.