LT3200
Owner
Manual
11
|
P a g e
4- Locate the video connector in cable
assembly as shown in photo 4 at right.
5- Orient the video plug as seen
in Photo 5A. Insert the edge into
its socket on the video board.
Align the connector parallel to the
socket and gently slide the
connector into the socket (Photo
5B). Using steady pressure
between thumb and fingernail of
index finger, seat the connector.
A properly inserted connector will
have the backside of the connector located parallel
to the socket. The white arrows (Photo 5C) point
out the slots in the socket that should be fully filled
with the white color of the connector.
6- Place the video ground clasp around the bare-metal
section of the video cable and attach it to the standoff
near the LED connector on the LED driver board. See
photo 6 at right.
Summary of Contents for LT3200
Page 1: ...LT3200 Owner Manual 1 P a g e Planar LT3200 Owner Manual ...
Page 8: ...LT3200 Owner Manual 8 P a g e IV Product Architecture LT3200 Block Diagram ...
Page 14: ...LT3200 Owner Manual 14 Page VIII Appendix Display Module Drawing ...
Page 15: ...LT3200 Owner Manual 15 Page Driver Box Drawing ...
